Acoustic Underlay 1.2mm Moisture Shield & Grip

PRODUCT DESCRIPTION
Nordic Built 1.2mm Acoustic Underlay with moisture seal and grip has unique with superior sound impact attenuating properties for both new and old buildings. It has an adherent top surface which is ideal for loose lay LVT tiles and planks. It also has a PP film underneath for a moisture barrier. This product is designed to be used WITHOUT GLUE. 
 
The 1.2mm Acoustic Underlay is specifically designed for allowing an easy and simple LVT installation without the need of adhesives hence our expression “TRUE LOOSE LAY”. By not gluing the LVT down the floor can be moved at any time and does not form part of the fixed build. Thus, body corporate does not responsible for integrity of flooring system.
 
Our patented advanced cross-linking technology offers superior acoustic silence. With the reduction of impact sound to suit both concrete and timber sub-surfaces our solution has been specifically engineers to meet the acoustical requirements of specifiers for all common construction and installation methods.
 
The NBU1.2LVT-SU500 can be installed over yellow tongue particle board without the need for glue or Masonite sheeting. Installing the underlay and LVT is simple, cost effective and quick.
 
FACTSHEET
Tolerance
-  Roll Width: 98cm ±1mm
-  Roll Length: 15m + 15-30cm
-  Thickness: 1.2mm
-  Density: 500 GSM ±50
-  7.3kg/roll
-  14.7m2/roll
-  34 rolls per pallet
-  0.040m K/W
 
Material
-  10% PP.PE.PET
-  90% Wind Power Recycled Rubber
-  Moisture shield 50μm polypropylene film
-  TAC-TOP surface
-  Polymerically bound black recycled rubber with PP film
-  Black appearance
 
Fire Class E (DIN EN 13501-1)
Temperature -25oC - 90oC
Lnw+Ci 45-54 (subject to subfloor structure)
Vaporization SD Value (m) 64, WVT (g/m2/hr) 0.0268
VOC 0.025mg
Compression CS (Kpa) 17.4 (CEN/TS 16354)
Product Code NBU1.2LVT-SU500
 
APPLICATIONS
-  High rise units, multi-storey townhouses & homes – commercial and residential
-  Under all types of LVT tiles and planks
-  Unique to the Australian market
 
FEATURES AND BENEFITS
  • Moisture barrier underside and TAC-TOP on the other – perfect for LVT loose lay
  • No glue needed since the product has a sticky surface
  • Easy to install, no maintenance and no special techniques required
  • Can be installed over Masonite and yellow tongue particle board – easier, cheaper, quicker
  • Enables LVT to be a true loose lay system – DIY friendly
  • Manufactured in Denmark to the highest quality
  • Uses a unique new technology that delivers superior acoustic results
  • Green star rated – Eco friendly (made from Australian recycled rubber)
  • Permanent resilient elasticity that does not collapse over time
  • Suited to high rise, multi-storey town houses, commercial and domestic usage
  • Suitable for loose lay and direct stick application
  • Can be used in conjunction with underfloor heating systems
  • Outstanding compressive strength and load bearing capacity
  • One of the thinnest products on the market - limits floor to ceiling heights
  • Has excellent temperature range capacity
  • Resistant to mould and mildew
  • “Deemed to satisfy” the requirements of the Building Code of Australia
  • Limited 10 year warranty
  • 1.2mm thick
  • PVC free product
  • No smell, no VOC emitted
  • Outstanding compressive strength (100mt) and load bearing capacity
  • Made from recycled car tires by using wind energy
  • Our rubber acoustic underlay has been individually tested in accordance with the requirements of ISO 140-7   
The source and transfer from one level to another varies in accordance with each individual building construction. Our products are specifically designed for the reduction of impact sound to suit both concrete and timber sub surfaces and has been specifically engineered to meet the acoustical requirements of specifiers for all common construction and installation methods.
 
Our products are proven to suit to a wide range of finished flooring surfacing including rubber, timbers, laminates, bamboo, ceramics, vinyl, carpets and can be laid in wet areas when installed with a compatible waterproof membrane system.
 
SUITABLE FOR
Our underlay is designed to suit a wide range of finished flooring surfaces. Ideally, the 500 LVT is suited for true loose lay LVT with no adhesives required. The underlay is also suited to an additional wide range of finished flooring surfaces including rubber, timbers, laminates, bamboo, vinyl and carpets. Perfect for high rise, multi-storey town houses, commercial and domestic usage.
 
INSTALLATION GUIDELINES
-  "Deemed to satisfy” the requirements of the Building Code of Australia
-  Our product has been independently tested for compliance to exceed the BCA requirements
-  Test results use the normalised impact sound pressure level according to ISO140-7
-  Refer installation instructions
 
CROSS-LINKED TECHNOLOGY
Our unique and patented cross-linking technology is the key to our superior acoustic, light yet strong features.
1. Grippy adhesive surface
2. Cross-linked acoustic rubber
3. Moisture shield layer