LVT SU500 1.2mm Acoustic Underlay
• Roll Length: 15m + 15-30cm
• Thickness: 1.2mm
• Density: 500 GSM ±50
• 7.3kg/roll
• 14.7m2/roll
• 34 rolls per pallet
• 0.040m K/W
• SD Value (m) 64
• WVT (g/m2/hr) 0.0268
• 90% Wind Power Recycled Rubber
• Moisture shield 50μm polypropylene film
• TAC-TOP surface
CS (Kpa) 17.4 (CEN/TS 16354)
adhesives hence our expression “TRUE LOOSE LAY”. By not gluing the LVT down the floor can be moved at any
time and does not form part of the fixed build. Thus body corporate not responsible for integrity of flooring
system.
Our patented advanced cross-linking technology offers superior acoustic silence. With the reduction of impact
sound to suit both concrete and timber sub surfaces our solution has been specifically engineers to meet the
acoustical requirements of specifiers for all common construction and installation methods.
The NBU1.2LVT-SU500 can be installed over yellow tongue particle board without the need for glue or
masonite sheeting. This saves time, it cheaper and quicker to install.
• Can be installed over yellow tongue particle board – easier, cheaper, quicker
• No glue needed for LVT – perfect for DIY applications
• Permanent resilient elasticity that does not collapse over time
• Manufactured in Denmark
• Suited to high rise, multi-story town houses, commercial and domestic usage
• Suitable for loose lay and direct stick applications if need
• Can be used in conjunction with underfloor heating systems
• Outstanding compressive strength (100mt) and load bearing capacity
• 1.2mm thick
• Made from recycled car tyres by using wind energy
• Resistant to mould and mildew
• Easy to install and no maintenance
• PVC free product
• No smell, no VOC emitted
• Limited 10 year warranty
loose lay LVT with no adhesives required. The underlay is also suited to an additional wide range of finished
flooring surfaces including rubber, timbers, laminates, bamboo, vinyl and carpets.
• Our product has been independently tested for compliance to exceed the BCA requirements
• Test results use the normalised impact sound pressure level according to ISO140-7
• Refer installation instructions
• Cross linked acoustic rubber
• Moisture shield layer